Перейти к содержимому

Denier (DEN)

DEN (denier) is a unit of the linear density of yarn: one denier means that 9,000 metres of fibre or yarn weigh 1 gram. On tights, a lower denier usually means a finer, more sheer knit and a higher one means more coverage, but denier is neither the weight of the whole pair nor the thickness of the finished product in millimetres.

How it works

Denier belongs to the direct yarn numbering systems. It describes the mass of a fixed length of yarn, not the thickness, warmth or durability of the finished tights. In the metric system the same property is expressed in tex and decitex (dtex). According to ISO 1144, the conversion factor from denier to tex is 0.1111, so the dtex value is obtained by multiplying the denier by 10/9. Example: 20 den is 22.22… dtex, which rounds to 22 dtex. The P101 product page shows the pair of values 20 DEN / 23 dtex. This is the declaration from the product label, not the result of a simple conversion.

In the shop, denier helps you judge whether a model will be more sheer or more opaque. It is only a starting point. The look on the leg is also affected by the knit, the colour, a matt or shiny finish and how far the fabric stretches. Two pairs with the same figure can therefore look different. A higher denier does not automatically mean better resistance to ladders and does not indicate what temperature to wear them in — this unit does not measure those properties.

What to look for when buying

Read the denier together with the coverage description and a photo of the model being worn, not in isolation from the rest of the label. If you want a subtle look on the skin, start with lower values; if you want a more definite colour and more coverage, consider higher ones. The shop’s range includes, among others, 9, 15, 17, 20, 30, 40 and 100 denier models — always check the exact value on the product page of the style you choose. With lustre yarns, the same denier can look different from matt tights, because light reflects off the surface. missO. Enjoy The View also uses this finish. Also look at the toes: reinforced toes are usually more durable in closed shoes, but in open-toe shoes they may be more visible than a sandal-toe version.

The denier range and the 20 DEN / 23 dtex declaration come from the shop’s FAQ and the P101 product page.

Frequently asked questions

Is the denier the weight of the whole pair of tights?

No. Denier describes the yarn: how many grams 9,000 metres of that fibre or thread weigh. It is not the weight of the finished pair or the packaging, nor the thickness of the fabric in millimetres.

How does DEN differ from dtex?

They are two scales for the same property, linear density. Decitex (dtex) is a metric unit: 1 dtex is 1 gram per 10,000 metres. According to ISO 1144, the dtex value is obtained by multiplying the denier by 10/9, so 20 den is 22.22… dtex, which rounds to 22 dtex.

Does a higher denier always cover the leg better?

Not always. A higher figure usually means more coverage, but the knit, the colour, the finish and how the fabric stretches on the leg also change the look. Two pairs with the same denier can look different.

See also

Sources

  1. ISO 1144:2016, Textiles — Universal system for designating linear density (Tex System) — denier as 1 g / 9,000 m, conversion factor to tex 0.1111.
  2. ISO 2947:1973, Textiles — Integrated conversion table for replacing traditional yarn numbers by tex numbers — Td system (denier): 1 g / 9 km.
  3. Cotton Incorporated, Technical Bulletin TRI-1014, Yarn Numbering Systems — https://www.cottoninc.com/wp-content/uploads/2017/12/TRI-1014-Yarn-Numbering-Systems.pdf
  4. The shop’s FAQ, question ‘What denier should tights be?’ — https://www.misso-lingerie.com/faq